Presentations

from the Symposium

Paper 1-1 Optical Emission Tomography - Professor Peter Bryanston-Cross, University of Warwick
Paper 1-2 Records of Unsteady Transonic Flow Past Blade Cascades by Means of Optical Methods - Jiri Ulrich, Aeronautical Research and Test Institute, Prague
Paper 1-3 Reynolds Stress Measurement with a Single Component Laser Doppler Anemometer - Rory Stieger, Whittle Laboratory
Paper 2-4 Precise & Rapid Unsteady Pressure Transducer signal Processing using a Transfer Function Modeling Technique - Fabrice Rottmeier, Swiss Federal Institute of Technology
Paper 3-1 On the Use of Hot Film Sensors in the Investigation of Fluid Dynamic Phenomena in the Near Wall Region - Philip Griffin, Stokes Institute University of Limerick
Paper 3-2 A New Probe for the Measurement of High-Temperature Gases - Xiaoli Yang, Whittle Laboratory
Paper 4-1 Performance Measurements in a Transient Turbine Test Facility - Preliminary Instrumentation Development - Nicholas Atkins, University of Oxford
Paper 4-2 Determination of the Mass Flow in a Compression Tube Turbine Test Rig - Luca Porreca, von Karman Institute
Paper 4-3 Determination of the Efficiency of a cooled Turbines Stage Tested in a Compression Tube Facility - Luca Porreca, von Karman Institute
Paper 6-2 Data Reduction and Thermal Product Determination for Single and Multi-Layer Thin-Film Guages - Nicholas Billiard, von Karman Institute
Paper 6-3 Experimental Technique for Evaluation of Heat Transfer Coefficients with a Thermocamera in a Plexiglass Model - Peter Magnusson, ALSTOM Power, Sweden
Paper 6-4 Heat Transfer Measurements on a Sidewall and Blade Surface of a Large Scale NGV with Leakage Flow - Axel Dannhauer, German Aerospace Center
Paper 7-1 A New Turbine Cascade for Aero-mechanical Testing - Damian Vogt, Royal Institute of Technology, Sweden
Paper 7-2 Reliability of Low-Speed vs High Speed Testing of LP Turbine Blade Wake Interaction - Maria Vera, Whittle Laboratory
Paper 7-3 A New Test Facility for Investigating Fluid-Structure Interaction Using a Generic Model - Davy Allegret-Bourdon, Royal Institute of Technology, Sweden