Up to September 2003, the University was a member (site number 90303) of the Mentor Direct scheme, under which software from Mentor Graphics was made available for teaching and research.
From October 2003 the UK Mentor Direct scheme was discontinued. In its place the Europractice scheme (of which the University is also a member) was extended to include virtually all elements previously supported under Mentor Direct.
The University representative for both initiatives is David Holburn, Department of Engineering, University of Cambridge.
For information about the Mentor products currently available under the European Europractice Initiative, please visit the local Europractice Resource Site.
The following information is provided for historical and documentary purposes only.
A list of the major packages that were supported under Mentor Direct is available here.
Alternatively, you can contact Jeremy Lane who manages Mentor's educational initiatives. He can be contacted as follows:-
Jeremy Lane,
ESEDA Limited
38 Penwood Heights
Burghclere, near Newbury
Berks RG20 9EZ
Phone: (01635) 817355 Fax: (01635) 817455
Mobile: (0973) 333943
Email: jwlane@eseda.com
Web: http://www.eseda.com
A range of packages and services in use from time to time in various University departments under the former Mentor Direct initiative.
Department |
Item/Service |
Computer Laboratory |
Europractice |
Department of Physics |
Europractice |
Radio Astronomy |
|
Department of Engineering |
Europractice |
Please note the keys in this text file are usable only on the machines for which they are intended.
1. Mentor Graphics software updates have now been received and are available in CUED. The CDs supplied are as follows:-
1. All 'Direct Support' Educational customers to receive MGC-C2 Release. This release is Y-2K compliant and it is recommended that all users upgrade to this release as soon as possible.
2. All 'Direct Support' Educational customers may request to use Modelsim (additional royalty payment necessary). Contact MGC Customer Support for further information.
3. 'Leonardo' from Exemplar will be available at £140 per license (min. 5 licences) up to 10, and £30 each for 11+. An additional Support Charge of £200 per year will be raised (any number of seats).
4. All 'Direct Support' Educational customers may request to use Interconnectix software. This new product set addresses the growing need for synthesis in high performance layout, and works with Board Station and other PCB/CAD vendors.
5. All 'Direct Support' Educational customers may obtain Board Station for Windows NT. This will have to be licensed from a Unix server or workstation. Contact MGC Customer Support for Software and Licences. Date TBA.
MGC Customer Support is contactable by 'phone on: (01635) 811111.
1. Mentor Graphics software updates have now been received and are available in CUED. The CDs and documents supplied are as follows:-
Please contact Stephen Mounsey if you need to borrow any of the CDs to update your installation.
Please note the following important points:-
Please contact Stephen Mounsey if you need to borrow any of the CDs to update your installation.
Please note the following important points:-
Please contact Stephen Mounsey if you need to borrow any of the CDs to update your installation.
Please note the following important points:-
Please contact Stephen Mounsey if you need to borrow any of the CDs to update your installation.
Please note the following important points:-
Please contact Stephen Mounsey if you need to borrow any of the CDs to update your installation.
Please note the following important points:-
Please contact Stephen Mounsey if you need to borrow any of the above CDs to update your installation.
Please note the following important points:-
Please contact Stephen Mounsey if you need to borrow any of the above CDs to update your installation.
HP-UX 10.20 is required (with Y2K patches) for workstations. If you are running 9.x there is a free upgrade programme to HP-UX 10.20, if you don't have a software support contract. (Note: some older systems like 715, B160L and certain other 7xx workstations may have insufficient disk/memory for this upgrade to be practicable. You may need to consider upgrading to a newer platform.)
(information supplied by OCSL)
All 'Direct Support' Educational customers should upgrade to the MGC-C2 Release of the Mentor software or later. This is the earliest release that is Y-2K compliant.
Libraries, technology files and documentation usable with Mentor IC Station are available for most of Europractice's foundry services. These are shipped in encrypted form on CD to the University coordinator. For further information, see the Europractice Resource site.
dmh Last updated 20 December, 2004.