|
General literature:
Al-Tabbaa, A., Perera, A.S.R., (2005). Stabilisation/solidification treatment and remediation. Part I: Binders and technologies—basic principles, Proceedings of the International Conference on Stabilisation/Solidification Treatment and Remediation, April, Cambridge, UK, Balkema, pp 367-385
Al-Tabbaa, A., Perera, A.S.R., (2005). Stabilisation/solidification treatment and remediation. Part II: Binders and technologies— research, Proceedings of the International Conference on Stabilisation/Solidification Treatment and Remediation, April, Cambridge, UK, Balkema, pp 387-397
Al-Tabbaa, A., Perera, A.S.R., (2005). Stabilisation/solidification treatment and remediation. Part III: Binders and technologies—application, Proceedings of the International Conference on Stabilisation/ Solidification Treatment and Remediation, April, Cambridge, UK, Balkema, pp 399-413
Al-Tabbaa, A., Perera, A.S.R., (2005). Stabilisation/solidification treatment and remediation. Part IV: Testing and performance criteria, Proceedings of the International Conference on Stabilisation/Solidification Treatment and Remediation, April, Cambridge, UK, Balkema, pp 415-435
Al-Tabbaa, A., Perera, A.S.R., (2005). Stabilisation/solidification treatment and remediation. Part V: Long term performance and environmental impact, Proceedings of the International Conference on Stabilisation/ Solidification Treatment and Remediation, April, Cambridge, UK, Balkema, pp 437-457
Al-Tabbaa, A., Perera, A.S.R., (2005). Stabilisation/solidification treatment and remediation. Part VI: Quality assurance and quality control, Proceedings of the International Conference on Stabilisation/ Solidification Treatment and Remediation, April, Cambridge, UK, Balkema, pp 459-468
Al-Tabbaa, A., Perera, A.S.R., (2005). Stabilisation/solidification treatment and remediation. Part VII: Good practice guidance documents, Proceedings of the International Conference on Stabilisation/ Solidification Treatment and Remediation, April, Cambridge, UK, Balkema, pp 469-485
LaGrega, M., Buckingham, P., Evans, J., C., Stabilisation and Solidification in Management of Hazardous Waste, Environmental Resources Management, McGraw-Hill, New York, 2001, ISBN 0-07-039365-6
Porbaha, A., State of the art in deep mixing technology: Part I. Basic concepts and overview, Ground Improvement, (1998) 2, 81-92
Porbaha, A., State of the art in deep mixing technology: Part II. Applications, Ground Improvement, (1998) 2, 125- 139
Porbaha, A., State of the art in deep mixing technology: Part III. Geomaterial characterisation, Ground Improvement, (2000) 3, 91-110
Porbaha, A., State of the art in deep mixing technology: Part III. Design considerations, Ground Improvement, (2000) 3, 111-125
Al-Tabbaa, A., Stegemann, J., A., Stabilisation/Solidification Treatment and Remediation. Proceedings of the International Conference, April 2005, Taylor & Francis Group ISBN 04 1537 460 X, 485pp.
EuroSoilStab—Design Guide Soft Soil Stabilisation CT 97 –0351
BS EN 14679:2005 Ececution of special geotechnical works - Deep mixing
Topolnicki, M., In-situ soil mixing, Chapter 9, in Ground Improvement, edited by Moseley and Kirsch, Spon Press, 2004
Deep Mixing Method - Principles, Design and Construction. Coastal Development, Institute of Technology, Japan
Dry Mixing Methods for Deep Soil Stabilisation. Proceedings of the international conference, Sweden, Balkema.1999
Al-Tabbaa, A. and Evans C. W. (2003). Deep soil mixing in the UK: geoenvironmental research and recent applications. Journal of Land Contamination and Reclamation, EPP Publications, Vol. 11, No. 1, pp 1-14.
Al-Tabbaa, A. (2003). Soil mixing in the UK 1991- 2001: state of practice report. Journal of Ground Improvement, Thomas Telford, Vol. 7, No. 3, pp 117-126.
Proceedings of the International Conference on Deep Mixing - Best Practice and Recent Advances, Stockholm, May 2005.
|
|
Soil Mix Remediation Technology |
